Manual - T1 Flatpack Kit 2025.9

What's In The Box

T1 WhatsInBox V25 Black Mesh
T1 WhatsInBox V25 Silver Mesh
T1 WhatsInBox V25 Gunmetal Mesh
T1 WhatsInBox V25 Midnight Mesh
T1 WhatsInBox V25 White Mesh

Included in the kits:

  1. Front Panel
  2. Rear Panel
  3. Top / Bottom Panel
  4. MB Strut
  5. GPU Strut
  6. Side Struts
  7. Power Supply Bracket - SFX
  8. AIO / Radiator Brackets
  9. Fan Brackets
  10. Side Panels: Mesh Side Panel x2
  11. PCIe Riser Cable
  12. USB-C Front IO Cable (Secured To Front Panel)
  13. Power Supply Inlet Cable (Right Angle)
  14. Screw Bag

NOT included in the kits:

  1. Fan + Radiator Bracket
  2. GPU Anti-Sag + Travel Kit
  3. Small Accessories Kit
  4. Power Supply Inlet Cable (Left Angle)
  5. Tall Case Feet

Screws For Assembly

T1V25 Screws For Assembly

Do NOT Overtighten The Screws! — Stop turning once resistance is felt; do not exceed one-quarter turn

🧭 Tip: Fasteners differ in length and head shape - lining them up side by side can help with identification

Use The Mat

Use The Mat

Build on the included mat to protect panels from scratches!

Install Side Strut (GPU)

T1V25 Install Side Strut (GPU)

Optimize Spacing

Divide Spacing Between Motherboard & Graphics Card

T1V25 RTX 4090FE 4080FE

3-Slot GPU RTX 4090F/4080 FE

T1V25 Asus Prime ProArt 5080

2.5-Slot GPU Asus Prime/ProArt 5080

T1V25 RTX 5090FE 5080FE

2-Slot GPU RTX 5090/5080 FE

T1V25 RTX 4000

1-Slot GPU RTX 4000

Use these common spacing configurations as a guide

Install GPU Strut

T1V25 Install GPU Strut2

🧭 Tip: Use the right standoffs so your GPU has the correct clearance


T1V25 Install GPU Strut2

T1V25 Install GPU Strut2

Adjust the Rear Panel spacing and screws according to the standoff height on the GPU Strut

Install MB Strut

T1V25 Install MB Strut

T1V25 Install MB Strut 2

Install MB Strut

T1V25 Install MB Strut 3

Install the Motherboard Standoffs into the MB strut and the GPU Strut

Install PCIe Riser Cable

T1V25 Install PCIe Riser Cable
T1V25 Install PCIe Riser Cable 2

Install GPU

T1V25 Install GPU

Install CPU Cooler

T1V25 Install CPU Cooler

Install Motherboard

T1V25 Install Motherboard

T1V25 Install Motherboard2

Install SFX PSU

T1V25 Install SFX PSU

T1V25 Install SFX PSU 2

Install PSU Inlet Cable

T1V25 PSU Inlet Cable

Pass the PSU inlet cable male part through the Rear Panel

Install Side Strut (MB)

T1V25 Install Side Strut (MB)

Install AIO/Fan Bracket

T1V25 Install Fan Bracket

T1V25 Install AIO Fan Bracket

Install Bottom Panel

T1V25 Install Bottom Panel

T1V25 Install Bottom Panel 2

Install Side Panels

T1V25 Install Side Panels

Insert the bottom edge of the Side Panel into the Bottom Panel slot
If not fully seated, the top panel will not close properly

T1V25 Install Side Panels 2

Final Step: Install Top Panel

T1V25 Install Top Panel

Insert the Top Panel’s front edge (tongue) into the Front Panel recess.

🧭 Tip: Make sure both side panels are fully seated first. If misaligned, the top panel won't close properly



T1V25 Secure Top Panel

Secure the top panel by inserting the included Thumbscrews into the Rear Panel holes and tightening by hand

🧭 Tip: These screws prevent accidental sliding or lifting of the top panel during use or transport

Accessory — Fan + Radiator Bracket

Buy Fan + Radiator Bracket

Accessory — GPU Anti-Sag + Travel Kit

Buy GPU Anti-Sag + Travel Kit

T1V25 Install Block Onto The GPU

❗ Caution: Use the correct screw size for your GPU. Screws are not included, as sizes vary by model. The included screws may work, but NCASE does not guarantee compatibility. Check before installation



T1V25 Install Hook Onto The Block

T1V25 Install Hook Onto The Block

T1V25 Install Hook Onto The Block

T1V25 Install Hook Onto The Block

Accessory — Small Accessories Kit

Buy Small Accessories Kit

Accessory — Tall Feet

More Details Coming Soon