M1 Classic (Discontinued)

V6.1 Updates:

• Chassis
• Adjusted front SFX mount position
• Adjusted 2.5" mounting holes
• Adjusted 2.5" drive SATA connector cutouts
• Added threaded nuts to fan bracket mounting holes
• Front I/O
  • New punch tooling for smoother edges
  • Audio combo jack changed to black
• SFX bracket
  • Added/modified flanges to mitigate possible PSU movement
• ODD bracket
  • Adjusted 2.5" drive mount screw holes for improved stacking bracket support
  • Added chassis mounted 2.5" drive screw access holes
  • Adjusted aux chassis 2.5" drive screw access holes
• Parts box
  • Removed 120mm fan filters
  • Fan grille count changed to 2
  • Adjusted screw counts
• Power cable
  • Changed to right angle

V6 Updates:

• Front I/O
  • Added USB Type C port (requires motherboard 20 pin Type E header)
  • Changed headphone and mic ports to single combo jack
  • All ports use new molds
  • Redesigned I/O bracket with swappable no-I/O faceplate (ports can be removed for cleaner look/slightly better 2.2+ slot GPU compatibility)
• Chassis
  • Redesigned ventilation holes on bottom and rear to improve airflow
  • Added longer fan mounting slots on the bottom
  • Bottom vents moved to separate steel floor plate attached to underside of chassis
  • Added bottom magnetic dust filter
  • Threaded inserts on PCI bracket
  • Added M4 screw holes for window mounting to chassis
  • Front-right chassis flange reduced, SFX PSU can now be installed from the right side
  • Reduced rear-left chassis flange to facilitate GPU installation
  • Enlarged chassis front GPU passthrough to facilitate GPU installation and provide more room for oversized GPUs
  • Removed four panel mounting clips from side flanges to reduce incidence of oversized GPU conflicts
  • Changed front 2.5" drive mounting to use screws instead of rubber grommets to save space/reduce complexity
  • Integrated fan bracket mount into chassis flanges
  • Added inside-front mounting for SFX PSU
• Motherboard tray
  • Changed to removable standoffs
• ODD bracket
  • Redesigned to single piece, now supports 9.5mm and 12.7mm ODD drives
• HDD cage
  • Redesigned to two pieces, now supports 2x 3.5" drives *or* 3x 2.5" drives; now allows mounting to inside front 2.5" mount (3x 2.5" configuration only)
• Top panel
  • Changed to 2mm thick
• Side panels
  • Extended ventilated area adjacent to GPU
• Other
  • New 15mm tall molded rubber feet
  • New adjustable GPU support bracket (adjustable for 2-2.5 slot cards)

V5 Updates:

• Front USB 3.0 ports cleaner look (removed port edges flanges)
• Motherboard tray is now fastened with screws instead of rivets to facilitate replacement or modding
• Later batches only:
  • Front USB 3.0 ports color changed from blue to black
  • Removed #6-32 screws for PSU mounting (some users were incorrectly using them in M3-threaded holes, stripping the threads)
    • Re-added for later batches, now in a separate labeled bag

V4 Updates:

• Fan bracket changed to steel and magnetic filter is now included
• Fan bracket mounts changed to allow 2mm of additional travel (allows 140mm fan w/120mm mounting holes to be used alongside a 120mm fan)

V3 Updates:

• Braces added to bottom corners of chassis for increased rigidity/decreased probability of wobbling
• 0.3mm decrease in side and front panel height
• Extra QC for wobbling & panel uniformity
• SFX bracket raised 2mm and flange trimmed for better SFX-L support (CAUTION: SFX-L is still a very tight fit with long GPUs, even with the revised bracket)
• Additional motherboard standoffs added for compact mATX boards (226x173mm max w/SFX bracket; see thread and google docs spreadsheet)
• Slightly increased CPU cutout size

V2 Updates:

• Enlarged CPU cutout upward on motherboard tray
• Additional cutouts at bottom of motherboard tray
• Move rear 92mm fan and tubing holes down 2mm
• Additional 3.5" HDD mounting location at forward bottom of chassis
• Cable tie holes on chassis bottom reduced from 10 to 5
• SSD stacking brackets modified to allow stacked 7mm thick SDDs closer
• ATX PSU bracket moved back to allow more clearance behind chassis front
• 3.5" HDD cage fixed to work in upper fan bracket position
• ODD bracket screw holes reduced for better M2 screw fit
• No top panel screw
• More SSD mounting screws
• Extra side panel clips
• Dome head M5 screws changed to flat head M5
• Shortened internal AC cable, changed to left angle
• Threaded inserts at side bracket mounting points
• Sub-millimeter increases to exterior panel dimensions to mitigate panel warping
• Feet color changed to black for silver cases

Our team works very hard to bring our customers the best product at the best value for our customers.

After exploring various manufacturing processes, to make the pricing reasonable and cost savings most impactful, some trade-offs had to be made.

• Color - Some color variations of the parts that make up the product is normal and expected. Also, some color variation between products of the same color is normal and expected. Examples of color variation can be viewed in this album.
• Surface - Minor surface blemishes are typical and expected, as long as they do not impede the product's functions. However, there is difference between exterior and interior standard
• Exterior - scratches / dents / blemishes on exterior surfaces larger than 3x2x1cm in size are covered under the warranty.
• Interior - scratches / dents / blemishes on interior surfaces larger than 3x2x1cm in size are covered under the warranty.

Note: The interior surfaces will inevitably show wear and tear by building the product. These trade-offs on the interior surface allow for better pricing on the products.

• Each shipping date has a limited, preset number of products available.

• Only the product options shown at the time of order are available.

• Items in the cart are not reserved, so they may go out of stock while checking out.

• Please ensure your shipping address is complete and accurate. Please notify us of any corrections as soon as possible.

• You will be charged immediately upon completing the checkout process.

• A confirmation email will be sent to you after completing your order. Check your spam folder if you don't see it. Hotmail/MSN/Outlook users: please add ncases.com to your safe senders' list, or emails may not get through.

• All changes to your order, including SKU, quantities, address corrections, or cancellation requests, must be submitted 72 hours before shipping. Otherwise, we cannot make any changes once your order.

• Cancellations requested by the customer are subject to a 5% payment processing fee. Additional foreign exchange fees may apply for payments *not in US dollars.

• Refunds are made to the original payment method and usually take 5-10 business days to process.

• Refunded orders cannot be reversed, and if you cancel and change your mind later, you will need to place a new order.

• All items are prepackaged for individual shipping by default, so we cannot combine shipping for multiple items unless stated otherwise.

• The shipping times we provide are only an estimate; actual shipping times may vary and are subject to customs processing or other delays.

• A third party provides tracking numbers to us within a few days of shipping. We will update your order with the tracking number once we have it (usually by the end of your shipping week).

• Tracking may show "Origin Post is Preparing Shipment" or something similar for some time. This is normal, as some shipping methods do not update tracking to indicate the item has been shipped. Tracking should resume updating once the package has reached the destination country and been processed through customs.

• Any import fees/taxes/VAT owed is the recipient's responsibility. Typically, the courier will notify you of any fees due. US customers do not have to pay any import fees.

• A signature is required for delivery. Please be sure that someone is available to receive and sign the package. If not, please coordinate with the courier to pick it up at their office.

• Please note that we cannot change the address or redirect shipments once they have shipped.

• If delivery fails and the package is returned to Asia, we may ask you to pay all or part of the shipping cost to have it reshipped. If, instead, after the package is returned, we may elect to refund the amount less all or part of the original shipping cost plus the 4% payment processing fee.